| Product name | Application | Cleaning method | How to use | Features | Metal Corrosion | Temporary rust preventive power | pH level and appearance | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steam | Vibration | Immersion | Ultrasonic | Iron | Copper | Brass | Aluminum | Zinc | ||||||
| PANACLEAN LN |
Quenching oil (cold, semi-hot) Heavy oil |
○ | ○ | × | × | 1 to 3% aqueous solution 50 to 80℃ |
Suitable for cleaning quenching oil and heavy oil Good oil-water separation and long life Rust-preventive rinse is required in the post-processing because of powder |
○ | △ | △ | × | × | △ | 11.3 Pale yellow to yellowish-brown solid |
| PANACLEANJET #46 |
Machine tool oil Chip removal Spray oil |
○ | ○ | × | × | 3 to 10% aqueous solution 50 to 80℃ |
Suitable for cleaning machine tool oil and chips Strong temporary corrosion inhibitor, suitable for cleaning rust-prone materials such as cast metals |
○ | ○ | ○ | ○ | × | ◎ | 11.8 Yellowish-brown liquid |
| Product name | Applicable standards | Appearance | How to use | Removal method | Rustproofing period | Features | |
|---|---|---|---|---|---|---|---|
| Indoors | Outdoors | ||||||
| IL-42 | Oil-based draining agent base | Pale yellow solid | Drainage agent added to petroleum solvents and chlorinated solvents | Over 1 month | — | Dissolve 0.3 to 2% in petroleum or a chlorinated solvent to make it a draining agent Excellent removal of moisture from parts Excellent separation of water and draining agent, and difficult to emulsify |
|
| Product name | Main component | Appearance | Active ingredient (%) | Application |
|---|---|---|---|---|
| LION ANTIRUST-S | N-ALKYL N, N’N’-TRIS-ACRYLATE | Liquid | 11.5 | Rust inhibitor |
| Product name | Application | Appearance | How to use | Features | Fluidity |
|---|---|---|---|---|---|
| LIOMIX MH | Various metal parts cleaning Non-iron metal parts cleaning Plating bath additives, cleaning aids |
Colorless to pale yellowish brown liquid | 1 to 20% dilution | Use at high temperatures (70℃ or higher) | Neutral |
| Product name | Application | Appearance | How to use | Amount to use | Features | pH level |
|---|---|---|---|---|---|---|
| IP DEFOAMER 61 |
Process engineering and general purpose defoaming agent | Pale yellow liquid | Adjust according to foaming conditions Split addition is very effective |
100 to 1,000ppm | Particularly effective on nonionic foam Low cost and economical (non-silicone based) |
6.5 |
| IP DEFOAMER 62 |
General purpose defoaming agent | White liquid | Dilute with any water and add as needed Or, add an appropriate amount in advance as a foam suppressant |
100 to 1,000ppm | Strong defoaming effect with small amounts Good acid resistance, alkali resistance, and heat resistance (silicone-based) |
7.7 |
| LIOMIX F-10 |
Detergent | Pale yellowish brown liquid | Air conditioning filter detergent | 13.0-14.0 |
