| Product name | Application | Appearance | Composition | pH level and ionicity | Solubility | Features | How to use |
|---|---|---|---|---|---|---|---|
| GN-72 | Release agent for molds and extrusions | White solid | Alkyl phosphate ester metallic salt | 7.5 Anionic |
Water soluble | Used as mold release agent for heat-resistant rubber, special rubber, etc.; particularly good wettability on molds (non-silicone type) |
For molds: 1% to 5% |
| SEPARSOL C-1500 |
Release agent for molds and extrusions | Colorless liquid | Polyalcohol Silicone derivatives |
8.0 Anionic |
Water soluble | Good releasing effect on fluoro, acrylic, and chlorinated fluoro rubber | For molds: 50- to 200-fold dilution |
| Product name | Appearance | Composition | pH level and ionicity | Solubility | Features | How to use |
|---|---|---|---|---|---|---|
| SEPARSOL 2500 |
Colorless liquid | Nonionic surfactant | 6.0 to 7.0 Nonionic |
Water soluble | Excellent high-temperature washability for vulcanized hose; low viscosity when diluted, allowing spray processing |
Use undiluted to 30% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| SEPARSOL 3000 |
White liquid | Nonionic surfactant Silicone |
4.3 Nonionic |
Water soluble and dispersible | Good heat resistance and washability | Use undiluted to 30% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| SEPARSOL 4000A |
Liquid ranging from colorless to pale yellow | Nonionic surfactant Triethanolamine |
10.2 Nonionic |
Water soluble | Good heat resistance Excellent washability; no stickiness on rubber surface; no corrosive deterioration on rubber |
Do not dilute Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| SEPARSOL 5900G |
Liquid ranging from yellow to brown | Polyalcohol | 8.4 Nonionic |
Water soluble | Good cleanability of vulcanized hose | Use undiluted to 30% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| GN-40 | Colorless liquid | Polyoxyalkylene alkyl ether | 6.0 Nonionic |
Water soluble | Good heat resistance and washability; excellent mold release |
Use undiluted to 30% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: 50℃ or lower |
| GN-48 | Pale yellow liquid | Nonionic surfactant | 9.5 Nonionic |
Water soluble | Excellent heat resistance and good adhesion to thermal mandrels; particularly excellent mold release properties |
Use undiluted to 30% aqueous solution Brush or dip hose and mandrels Optimal cleaning temperature: 25℃ or lower |
| GN-63 | Pale yellow liquid | Nonionic surfactant Sodium di-2-ethylhexyl sulfosuccinate |
8.6 Anionic |
Water soluble | Good wastewater treatability (low COD) | Use undiluted to 30% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| GN-82B | Light yellowish brown liquid | Nonionic surfactant | 8.8 Nonionic |
Water soluble | Excellent cleaning properties; good skin protection |
Use undiluted to 30% aqueous solution Brush or dip hose and mandrels Optimal cleaning temperature: not specified |
| GN-86 | Light yellowish brown liquid | Nonionic surfactant | 8.5 Anionic |
Water soluble | Improved wastewater treatability of GN-82B (low COD) | Use undiluted to 30% aqueous solution Brush or dip hose and mandrels Optimal cleaning temperature: not specified |
| GN-197B | Colorless to pale yellow liquid | Nonionic surfactant Soap |
9.7 Anionic |
Water soluble | Effective for acrylic rubber, epichlorohydrin rubber and other special rubbers; effective in protecting mandrels |
Use undiluted to 30% aqueous solution A portion of the hose is immersed in the conditioning bath, inserted into the mandrel, and vulcanized Optimal cleaning temperature: not specified |
| GN-639-6 | Colorless to light yellow liquid | Polyether polyol | 8.6 Nonionic |
Water soluble | Easy to clean vulcanized hose; low viscosity when diluted, allowing spray processing |
Use undiluted to 30% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| GN-657 | Light yellowish brown liquid | Silicone derivatives | 9.1 Nonionic |
Water soluble | Low silicone content improves poor adhesion and mold flow failure, which are drawbacks of silicone. | Use undiluted to 50% aqueous solution |
| GN-4507 | Pale yellow liquid | Poly(oxyethylene) = alkyl ether | 8.2 Anionic |
Water soluble | Excellent heat resistance and mold release; no corrosion or deterioration of rubber |
Use undiluted to 50% aqueous solution Spray or dip hose and mandrels Optimal cleaning temperature: not specified |
| Product name | Application | Appearance | Composition | pH level and ionicity | Solubility | Features | How to use |
|---|---|---|---|---|---|---|---|
| GX-351 | Inside tire paint | Grayish white liquid | Talc Sodium di-2-ethylhexyl sulfosuccinate |
8.3 Anionic |
Water soluble and dispersible | Excellent anti-adhesion qualities with a tiny quantity; excellent wettability and smoothness on rubber |
GX-351: 10 to 30% |
